Motor-pump for spraying Cillitek group with pump Annovi Reverberi AR 202 S VRI,
4-stroke engine 2.5 hp and carriage tank 120 liters with solid wheels puncture.
Complete avvogitubo, high pressure hose 50 mt and lance with 60 cm lever.
Experience brilliant performance with motor pump unit Annori Reverberi AR 202 S VRI , medium pump
pressure semidraulica membrane, for agricultural spraying small to medium capacity.
All parts in contact with the liquid are anodized. Pump modern conception, high
regularity in flow , with intake manifolds / internal flow. Crank mechanisms in an oil bath,
to inspect the tank. Screws with protective surface coating. Nitrile rubber membranes.
Large load capacity with the 120 liter tank which should be added an excellent maneuverability
thanks to the large wheels puncture useful for smooth travel over rough terrain.
Load-bearing structure of the carriage in solid tank construction in printed painted sheet steel
powder for a greater resistance to rust. The wheelbarrow has a vibrant anti rubber feet
useful for the damping of the engine vibration and stabilize the car to the ground.
High-pressure hose reel with solid construction in the printed sheet steel, coated disk
and galvanized structure for enhanced resistance to rust. High pressure hose length
50 linear meters to have a greater full versatility of lance 60 cm lever.
Motor pump ideal for spraying treatments of pesticides, chemical weed control
and for the distribution of liquid fertilizer in solution. For spraying treatments of greenhouses, gardens,
flower beds and vegetable gardens, and for disinfection of both open and closed environments.
Also useful for washing industrial fixed installations, sewage and drainage and for fire protection systems.
|L / 1 '||gpm||bar||psi||° C||° F||HP||RPM||THE||H||IN||mm|
|2||23.2||6.1||20||290||60||140||1.02||650||4||222||220||198||E 20||2 x Ø 8|
|bar||psi||Tours / minute - RPM|
|L / 1 '||gpm||HP||L / 1 '||gpm||HP||L / 1 '||gpm||HP||L / 1 '||gpm||HP|
|Engine type||4 times (OHC)|
|Power||2,5 HP - 1.0 kW - 3,600 r/min|
|Maximum torque||3N m / 2,500 r / min|
|Fuel tank capacity||2 en|
|Oil tank capacity||0.3 lt|
|Minimum fuel consumption rate g / kWh||less than or equal to 450 g / kWh|
|Dry Weight||8.8 kg|
|Structure||stamped steel powder coated|
|Tank capacity||120 lt|
|Carry handle||Adjustable angle|
|Dry Weight||About 50 kg|
|Puncture Tires||350x50 mm|
|Capacity reel||100 mt (outer diameter 8 mm max)|
|High pressure hose||50 linear meters|
|Lancia||A high-pressure lever 60 cm|
|Filter||in line G1 "- 50 mesh - Knockdown|
|Overall dimensions (footprint)||cm 170 x 70 x 80 h|